Posts

, ,

IRRIGATION FITTINGS

IRRIGATION FITTINGS

PLASSON’s range of poly pipe fittings can help you complete any irrigation project. PLASSON fittings are high quality, UV stablised and corrosion-free to deliver leak-free watering systems that last. Our metric compression fittings up to 63mm also feature captive O-rings which seal the instant the fitting goes on the pipe – which can save both time and water during install.

PLASSON’s unique captive O-rings and longer body design help you achieve long lasting, leak-free poly pipe joins, even in tough install conditions and in both hot and cold climates.

The metric compression fitting range offers reliable options for joining blue stripe poly pipe as well as lilac pipe for recycled water.

PLASSON’s Rural range has been specially engineered to join ag green stripe pipe. The innovative red barbed ends allow PLASSON Rural poly pipe joiners to connect both metric and imperial dimension pipe.

IRRIGATION FITTINGS THAT ARE SIMPLE YET SMART

PLASSON’s Quick Coupling Valve delivers easy control of pressurized water with a simple valve and key system.

This system can be installed almost anywhere with no power needed and no software required to make it work.  Just plug in the key, the valve is activated and water flows. Unplug the key, the valve closes and flow is switched off.

PLASSON also offers a lilac cap QVC for grey water and recycled water systems.

Increasingly, recycled water is now supplied to homes and businesses through purple pipes. These pipes supply water for flushing toilets, washing clothes and outdoor uses such as watering gardens in homes and businesses. The lilac cap QCV is designed to connect to recycled water supply to provide safe and secure connections for garden watering equipment, like sprinklers and hoses, as well as other irrigation tools.

PLASSON has always been a leading innovator – it was our technology that helped give the world the dual flush toilet cistern!

We are committed to providing a world-leading range of poly pipe joiners that deliver reliable. long-lasting PE pipelines.

PLASSON has always been a leading innovator – it was our technology that gave the world the dual flush toilet cistern!

We are committed to providing a world-leading range of poly pipe joiners that deliver reliable. long-lasting PE pipelines.

PLASSON products can be found in municipal water distribution systems, gas conveyance systems, industrial fluids transfer and wastewater systems and mines in over 80 countries around the world.

/0 Comments/by
,

HOW TO JOIN POLY PIPE

HOW TO JOIN POLY PIPE

When it comes to water, wastewater and gas pipelines, poly pipe (or polyethyene/PE as it is also known) is hard to beat. The flexible nature of polyethylene pipe allows it to be used in colder climates – where it will not crack – and in situations where rigid pipe would require multiple elbows to make complex turns.

Unlike other plastic piping, poly pipe connections do not use glue to solvent weld pieces together. Instead, specially designed fittings seal poly connections using compression – this is why they are sometimes known as compression fittings.

PLASSON has engineered a range of simple yet smart compression fittings to make joining poly pipe easy and reliable. All PLASSON poly pipe joiners feature a unique O-ring design that means the fitting will seal the moment it goes on the pipe – tightening the nuts on PLASSON compression fittings is only neccesary to hold the pipe in place and prevent blow outs.

This innovative design feature means PLASSON compression fittings are easy to install with a minimum of tools.

All PLASSON poly pipe joiners are corrosion-resistant and made of UV stablilised material for a long service life.

INSTALL GUIDE FOR PLASSON PLUMBING FITTINGS

HOW TO JOIN POLY PIPE OF DIFFERENT SIZES

PLASSON REDUCING FITTINGS CONNECT PIPE OF DIFFERENT DIAMETERS

metric compression reduing fittings for 20 mm 63mm 110mm

Metric compression reducing tees Plasson Australia 63mm
/0 Comments/by
,

PLASSON QCV – IT’S EASY TO GO WITH THE FLOW

PLASSON QCV – IT’S EASY TO GO WITH THE FLOW

Who doesn’t want simple and cost-effective control of their water… life is complicated enough as it is! That’s why PLASSON developed the

Quick Coupling Valve. This handy device allows pressurized water to be turned off and on with a simple click in key.

Plasson Quick Coupling Valve for cost-effective irrigation

Usually installed at ground level, the QCV internal valve is normally closed so water does not leak out. The valve is activated by lifting the flipcap and inserting the “KEY”. On top of the key you can insert a sprinkler or a hose.

QCV’s deliver cost-effective irrigation and stock watering without complicated systems or software.

Click here to watch our simple install video…

/0 Comments/by